Midiplus Studio m pro otg

Features

• 1 in/2 Out USB audio interface with 24 bit/192 kHz audio resolution
• 1 Mic/Line/Hi-Z combo input with 48V phantom power supply and Input Gain control
• 2 colors Input level LED
• Independent monitor output volume and headphone volume control
• 2 Level Meters
• Connect to your mobile phone through OTG or a 3.5mm jack
• OTG input/output
• High-speed USB 2.0 and bus-powered

Hardware Features

1. Mic/Line/Hi-Z combo input: Connect the microphone via XLR or use the 6.35mm jack to connect your instrument (such as an electric guitar) or line input
2. Input gain control: Adjust the gain level of the microphone, instrument or line input. Rotate counterclockwise to reduce the gain level and clockwise to
   increase the gain level
3. Instrument input switch button: Switch instrument/line input of 6.35mm input. Line in when the button light is off, instrument in when the button light is on
4. 48V phantom power switch: Turn on 48V phantom power supply of input 1/2 channel
5. OTG switch: The button lights Yellow means both the OTG Input and Output are turned on C) Press the switch, and the button lights Red means turn on the route from mobile phone to OTG, press the switch twice to turn off the route C) Long press the switch over 2 seconds, the button tights Green means turn on the route from OTG to the mobile phone, long press the switch again to turn off the route
6. Headphone output level control: Adjust the headphone output level, rotate counterclockwise to reduce the level, and rotate clockwise to increase the level, and the knob light is the USB status LED
7. Monitor output level control: Adjust the monitor output level. Rotate counterclockwise to reduce the level and clockwise to increase the level
8. Headphone output: 6.35mm stereo output, connect to your headphone
9. Monitor output: Connect to your monitor
10. 3.5mm Phone jack: Connect to your mobile phone via the 3.5 TRRS cable
11. Type-C OTG port: Connect to your mobile phone via the Type-C cable
12. USB port: Connect to your computer

Start Using

1. Connect Connect the Studio M Pro OTG to a computer by using the included USB A to USB C cable, and the USB status LED on the Headphone knob will light on.
2. Installation Windows: Go to http://www.midiplus.com/cn/support.aspx?ld=1 to download and install the latest driver. macOS: No need to install any drivers.
3. Setting the default sound device Windows: Go to Settings> System > Sound and then select the Studio M Pro OTG as your device for Input and Output. macOS: Go to System Preferences> Sound and then select the Studio M Pro OTG as your device for Input and Output.

Connection Example

Specifications: